XTOOL Official Store
1. All products in XTOOL official store are 100% official authentic and have a 5-year warranty
2. XTOOL has US/UK/CA/EU/AU/RU/BR/MX overseas warehouse merchants to bear the tax, and can be delivered within five days
3. XTOOL provides 24-hour online service and professional technical support
4. For any model support issues, please refer to XTOOL official website XTOOLTECH.COM
5. Hope you have a good shopping experience in XTOOL, thank you again for shopping in XTOOL
XTOOL D8S Automotive Diagnostic Tool [2023 New Upgraded], Topology Map, Bi-Directional Control, ECU Coding, Full Diagnostics & 42+ Resets, Key Programming, DoIP/CAN FD, Upgraded Ver. of D8BT/D8
OE-Level Full System Diagnostic with Topplogy Module Mapping
With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.
42+ Maintenance Services & Full Special Functions
Oil Reset, EPB, BMS, SAS, DPF, Throttle Relearn, ABS Bleed, Key Programming, injector Coding, Air Suspension, Transmission Relearn, TPMS Reset, Airbag Repair, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector Balance Test, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, rewrite the vin on pcm, alcohol composition reset, suspension calibration, etc.
PMI Functions （Offline Programmer For Ford ,For Mazda）
When you replace or initialize a new/used module fo Ford/Lincoln/Mazda, XTOOL D9 allows you to copy the data from the original module and install it to the new unit to finish the module replacement.
Bi-Directional Control
Full control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Windows Turn On/Off, Fuel Trim Reset, Fuel Composition Reset, etc.
Support CAN FD/DoIP
access new communication protocols of CANFD (for MY2020+ GM models), and DOIP (for BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes)
Advanced ECU Coding & Refresh Hidden Functions
XTOOL D8S performs Online Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And reprogram the adaptive data for certain components after repairs or replacements.
Guided Functions
With VAG Guided Functions, D8S can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/Audi/Skoda, etc.
IMMO/Key Programming
Add/reprogram new Keys/Fob/Remote, disable lost keys.Can works with kc501 and sk1 .
also the ks01,m822,xv100 adapters For toyota benz all key lost
Top Hardward Configuration
Android 10.0 systems, 8.0'' Touch Screen, 10000mAh Battery, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 4G RAM & 64
10000+ Vehicle Coverage
Covers 10000+ Vehicles includes American, European, Asian, Japanese brands.
3 Years Software Udpate & Support 14+ Languages
3 Years Free update Values 600$ ,after 3 years the D8S can keep works with old software won't have limited, also the D8s support 14 kinds of language for English, Spanish, French, German, Arabic, Russian, Italian, Polish, Portuguese, Finnish, Japanese, Korean, Vietnamese
AutoScan & AutoVIN
AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
OE Full Systems Diagnostics
With complete capabilities for read and clean codes, live data graphing, freeze frame, access and diagnose all available modules like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc.
Advanced ECU Coding & ECU Configuration
ECU coding capability for VW/AUDI/SKODA ONLY which performs online Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.
Flash Hidden Functions(ECU Configuration) for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob.
Bi-Directional Control/Active Test
Full bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. Such as EVAP Tests, Compression Test, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Test, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, etc
Intelligent Topology Mapping
• Equipped with color coded module status for faster full system diagnostic results.
• View the communication structure between modules clearly with all the situation of each system.
• One click to display the fault co*de and enter the system executive function directly.
• AutoScan & AutoVIN
AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
Live Data & 8-in-1 Gramphing
Live Data Graphing: A line graph will allows you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, etc.
✔ Export Live Data as CSV: Exporting live data as CSV file to track vehicle performance over time.
✔ 8-In-1 Graphing: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view.
40+ Special Functions
✔ Oil Reset: Reset service intervals after oil change and turn off the oil light.
✔ EPB Reset: Reset brake pads after replacement of brake system.
✔ SAS Adjustment: Perform calibration of the steering angle sensor
✔ BMS Reset: Register the new battery to the ECU after replacement.
✔ Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.
✔ ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.
✔ Injector Coding: Coding injectors after replacement.
✔ Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
✔ Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.
✔ Key Programming/IMMO: Disable the lo~st vehicle keys and program a new replacement key fob.
✔ Advance Special functions added: Steering position sensor calibration, SWS Calibration, Yaw Rate Sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, reset control unit, A/C Relearn, etc. Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.
Key Programming/IMMO
Reprogram new keys+ Add new fobs+ keyless remote+ Disable lost keys
• Cover 14+ menu languages: XTOOL diagnostic tool D9 Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
• Report share and print: D9 auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
• Cover 10,000+ Vehicles, Up to 2022, 2021, including cars, SUVs, minvans, 12v light-duty trucks
Free Shipping on All Orders
Xtool is proud to offer free shipping on all orders. We have global warehouses like the USA, UK, Australia, EU, Asia, etc. We choose the nearest warehouse for shipment according to the customer's address.
We use the best carriers in the industry to ensure your order arrives on time. During the checkout process, the website will automatically free shipping for orders to your delivery address. Delivery times vary depending on the delivery address you choose, item availability, and when you place your order.
If customs fees happen, please contact info@xtoolglobal.com, and we will bear the expenses.
Shipping Time
We will arrange delivery within 24 hours after you have placed your order.
For orders placed in the USA, UK, Australia, and EU regions, the shipping time will take 3-7 days.
Other Regions' orders will be sent from the China warehouse, the shipping time will take about 5-10 days.
If the transport delay happens, please let us know and we will check the shipping status;
If the orders are never received, please let us know what happened, we will check with express engency and reschedule shipment or coordinate compensation.
Order Processing
Orders received before 2 pm PST will ship the same business day from one of our US-based warehouses. Orders received after 2 pm PST will ship the next business day.
Battery Shipping Restrictions
Tools containing batteries are subject to shipping restrictions that limit the number of batteries that can be included in each shipping box. Orders for multiple tools with batteries may be shipped in multiple shipping boxes to comply with carrier shipping restrictions.
Next steps
Once your order is placed, we will send information about your order to the email address you provided during the checkout process.
Order Confirmation
The order confirmation email provides a summary of the items in your order.
Shipping Notification
Once your order has shipped, we will send a shipment notification email. This email includes the carrier name, tracking number, and delivery date. You can click the tracking number to track your package on the carrier's website.
Order Tracking
To track the status of an existing order, please go to our order inquiry page. Enter your order number and the email address you used when placing your order to check the status of your order. You can find your order number in the order confirmation email sent your order was placed. If you are not able to locate your Order Number or have any additional questions regarding the status of your order, please contact Xtool Support at support@xtoolglobal.com.
