EZ400 Pro is an auto diagnostic Scanner based on the Android system newly developed by XTOOL. EZ400 Pro has the basic functions of full system diagnosis, ECU information reading, code reading, clear fault code, reading real-time data stream, freezing, and driving test. It is the perfect choice of auto diagnostic tools.

Features:

■Complete OBD2 functions

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes, and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically, and stores freeze frame data.

I/M Readiness Status: This shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Advanced ECU Coding

ECU Coding will open up more hidden personalized functions of your vehicle, such as closing the windows with the remote control, improving the vehicle performance, setting the folding function of the rear-view mirror, and you can also disable some annoying functions through EUC coding, such as changing the buzzer on the vehicle, disabling the safety warning sound and start/stop function, etc., to bring you a more comfortable driving experience.

Bi-Directional/Active Test

XTOOL EZ400 has a Bi-Directional control function. It can access vehicle subsystems and components through active testing, and then output commands through ECU to detect the integrity of vehicle systems and components, and find out the fault location and cause, such as evap test, cylinder deactivation, cycling a / C Clutch on / off, opening fuel injector, on / off, ABS motor pump for cycling, testing windows, doors, skylights, wipers, etc, So as to easily and effectively find out the fault location.

More than 30+Special Functions

*Oil/Service/Maintenance Light

Performs reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate, and turns off the warning light

*Electric Parking Brake (EPB)

Maintains the electronic braking system safely and effectively through deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

*Throttle Relearn

Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately

*Tyre Pressure Reset

Relearn TPMS sensors so that new sensors can be recognized by ECU

*Immobilization/Key Programmer

enables you to disable the lost vehicle keys and program a replacement key fob

*BMS Reset

Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information and prevent the related control module from detecting false information

*Headlight

It detects the light of the environment, then decides whether to automatically turn on the headlights or not. It can also adjust the headlights in time

*Air Suspension

For Audi, Mercedes Benz, BMW, Citroen, Chrysler, Ford, GM(Cadillac, Chevrolet, GMC, Holden) Peugeot, Seat, Skoda, VW, ChangAnFord, DFCitroen, SGM, Y

*Steering Angle Sensor Adjustment

Performs calibration for the Steering Angle Sensor (SAS), which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared

*DPF

carry out numerous functions to the Diesel Particulate Filter system. The tool will manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit

*ABS Bleeding, Gearbox Match, Injector Coding, Airbag Repair and etc...

OE Level All Systems Diagnostic (Few minutes Read all systems)

In order to better diagnose the vehicle, XTOOL EZ400 can realize the diagnosis and maintenance reset of all systems,

including the vehicle ECU to read and clear DTCs, retrieve real-time data, freeze frames, and ECU information, and perform active testing, matching, adaptation, turn off warning lights, and reset the monitor.

Auto VIN/Auto Scan/VIN Scan/Manual VIN Input

Remote Technical Support

Customers can get remote support from XTOOL's team of technical engineers who control your device from their PC via TeamViewer software.

Maintenance Assistant:

Includes how-to videos, how-to tips, user manuals, Q&A, quick start guides, and more.

One Click Update Online & Mutil Languages Support

XTOOL EZ400 supports 3 years of free updates, you can get the latest version of the software, enjoy the latest technology and cover more new models.

After the 3-year free update service expires, XTOOL can still be used normally.

XTOOL EZ400 can support 15 kinds of language: English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese, and traditional Chinese.

• Brand Name: XTOOL
• Origin: Mainland China
• External Testing Certification: ce
• Hardware Version: 2021
• Item Length: 18cm
• Special Features: Wifi,Bluetooth
• Software Version: Newest
• Item Width: 21cm
• Model Name: EZ400 PRO
• Item Height: 20cm
• Power: W
• Item Type: Other
• Item Weight: 6kg
• Voltage: V
• Electronic: Yes
• Material Type: Plastic
• Delivery: FAST DHL 5-10 Days Arrived
• Taxes: Free Taxes From Oversea Warehouse
• Warranty: 3 Years
• Update: Free Life time
• Functions: Full System diagnostic functions
• Function 1: Key programmer
• Function 2: Code Read,SAS EPB DPF Oil
• Car Brand Support: Works for BMW/BENZ/AUDI/VOLVO/Toyota/Ford...
• Most same porducts: Most like Launch X431 /Autel MK808
• Language: English/Russian/Poland/German/Portuese/France/Spanish

Shipping: Free Shipping, 3-5 days delivery time; Express Shipping Service, we send directly from the nearest warehouse. Know more?

Returns: Return for a refund within 30 days, Read details?

Want the wholesale business to get a lower price?

contact: sale@xtoolglobal.com

OFFICIAL Xtool SUPPLIER: 100% GENUINE PRODUCTS

Know More at our refund policy